TALEN and CRISPR Validation Tools - UK (2024)

CRISPR validation techniques for every step of the workflow

Select the stage of your workflow to see recommended validation techniques.

Validate your TALEN or CRISPR edit with a T7 endonuclease-based assay

The Invitrogen GeneArt Genomic Cleavage Detection (GCD) Kit is a T7 endonuclease assay designed to quickly and confidently confirm CRISPR or TALEN insertions, deletions, or gene modulations. With minimal hands-on time, from cell harvest to quantified results, the analysis of your genome editing events can be achieved in just four hours.

Data: Gel analysis of cell lysates to determine efficiency of CRISPR cleavage using the Invitrogen GeneArt Genomic Cleavage Detection Kit

Figure 1. CRISPR-Cas9–mediated cleavage efficiency. Gel image of a cleavage assay using the Invitrogen GeneArt Genomic Cleavage Detection Kit for the HPRT locus. (A) Results using the GeneArt CRISPR Nuclease OFP Vector expressing HPRT-specific CRISPR RNA. (B) Results obtained using the GeneArt CRISPR Nuclease CD4 Vector expressing HPRT-specific CRISPR RNA. Following transfection into HeLa cells, triplicate cleavage assays were performed, and the percentage of indels was calculated.

Positive, negative, and delivery controls for CRISPR validation

Having the proper positive, negative, and delivery controls is pertinent to the success of any gene editing validation strategy. Please refer to the complete line of CRISPR controls offered by Thermo Fisher Scientific when designing gene editing experiments from the initial design to the validation of all gene editing work.

Validate TALEN and CRISPR-Cas9 editing efficiency with TALEN and CRISPR sequencing

Although GeneArt Genomic Cleavage Detection (GCD) assays are quick and inexpensive, results must be further analyzed to ensure that only the desired mutation was introduced. This can be done with DNA sequencing.

TALEN and CRISPR sequence analysis with Sanger sequencing

Sanger sequencing is a critical validation tool for TALEN and CRISPR experiments due to its lower cost for targeted sequencing, simple workflow, and uncomplicated data analysis.

Data: An evaluation of CRISPR-Cas9 editing efficiency using Sanger sequencing

Sanger sequencing can be used to determine the efficiency of nuclease cleavage. In the following experiment, lysate from treated cells was sequenced using SeqScanner 2 software.The results showed a mixed sequence where the edit occurred(Figure 2A). The results were then analyzed using the Tracking of Indels by Decomposition (TIDE, Brinkman, EK et al. (2014)) software. The SeqScreener Gene Edit Confirmation App on Thermo Fisher Connect can be used to determine the spectrum and frequency of targeted mutations.

Figure 2. Use of Sanger sequencing for determining editing efficiency. (A) A mixed population of HEK293 cells with a genome edit event at the human HPRT locus was analyzed using SeqScanner 2 software. Note the position of the edit, indicated with the red arrow. (B) Analysis of the sequence trace using TIDE software. The fraction of cell predicted to have -1, -2, -3 etc deletions, as well as the overall predicted editing efficiency, is shown.

TALEN and CRISPR sequencing studies with next generation sequencing (NGS)

NGS offers a powerful tool, with high-throughput capabilities, for TALEN and CRISPR analysis. This method offers both qualitative and quantitative screening of all TALEN and CRISPR targeted mutations. NGS can analyze many samples at once to accurately determine which cells have the desired TALEN or CRISPR targeted mutation. Also, off-target effects can be assessed with TALEN and CRISPR NGS analysis for multiple samples.

Assess cellular health and phenotype with TALEN and CRISPR cell culture studies

Data: Validate Cas9 delivery using immunocytochemistry

Immunocytochemistry is a standard technique for identifying specific proteins within the cell. Using an anti-Cas9 primary antibody and a labeled secondary antibody, Cas9 expression can be detected on a cell-by-cell basis with fluorescence imaging.

Figure 3. Monitoring Cas9 delivery.(A) U2OS cells and (B) U2OS-Cas 9 cells were treated withCRISPR-Cas9 monoclonal antibody, then stained with agoat anti-mouse Alexa Fluor 594 conjugateandHoechst 33342. Red punctate staining in the cytoplasm shows the presence of Cas9. Cells were visualized using anEVOS FL Auto Cell Imaging System.

Data: Validate CRISPR Cas9 lentivirus delivery using automated cell counting, transmitted light imaging, and flow cytometry

Antibiotic selection, gene expression, and immunocytochemistry assays are frequently used to monitor the assembly of CRISPR components for gene editing in the cell. Fluorescent protein expression can be measured directly, and when antibiotic selection is used to identify transfected cells, viability assays can be used to monitor the selection process.

Figure 4. GFP expression measured using the Countess II FL Automated Cell Counter. U2OS cells expressing the Cas9 protein were transduced with Invitrogen LentiArray Positive Ctrl gRNA (HPRT-GFP) and Invitrogen LentiArray Negative Ctrl gRNA (Scrambled-GFP) at MOIs of 1 and 2. Two days later, cells were counted and measured for GFP on the Countess II FL Automated Cell Counter. Measurements showed the percentage of cells positive for GFP and indicated the percentage of transduced cells expressing the GFP and puromycin resistance gene (2A and 2B).

Figure 5. Antibiotic selection using the EVOS XL Core Imaging System for transmitted light imaging.Cells transduced with Invitrogen GeneArt Lentiviral CRISPR Positive Ctrl particles (HPRT-GFP) show normal viability(A)before treatment. After four days under puromycin selection(B), cells are clumped and stressed in response to antibiotic.

Figure 6. Measuring transfection efficiency in 293T cells using flow cytometry. The Invitrogen GeneArt CRISPR Nuclease Vector with OFP Reporter Kituses expression of an orange fluorescent protein (OFP) to label transfected cells. Transfection efficiency was measured in 293T cells using the Attune NxT Flow Cytometer, and the data shows >90% OFP-positive cells in transfected samples.

Western blot for CRISPR analysis

Western blotting is a technique broadly used to detect and determine if specific proteins are present in the sample being analyzed. In CRISPR experiments, western blotting is used to determine transfection efficiency as well as measure expression.

Data: Validate CRISPR transfection efficiency and protein expression with western blot

In Figure 7, western blotting was used to compare the expression of Cas9 in cells transfected with different CRISPR formats.Phenotypic changes can also be quantified in a population of cell using western blotting, as shown inFigure 8.

Figure 7. Western blot detection of Cas9 accumulation over time in plasmid DNA, mRNA, and protein transfected cells. HEK293FT cells were transfected with Cas9 plasmid DNA, mRNA, or protein. Cells were harvested at indicated times to perform western blot analysis. Proteins in the cell lysate were separated on a NuPAGE 4–12% Bis-Tris gel, transferred to PVDF membrane using theiBlot 2 Gel Transfer Device, incubated with mouse monoclonal Cas9 antibody at 1:3,000 dilution and rabbit anti-mouse HRP conjugated secondary antibodyat 1:2,000. The membrane was developed using Pierce ECL substrate. (Liang et. al., Journal of Biotechnology, 208, 44–53.)

Figure 8. CRISPR-edited Hap1 cells accumulate LC3B after chloroquine treatment.LC3B can be measured using quantitative microscopy or western blotting.

Using polymerase chain reaction (PCR) in TALEN and CRISPR validation

PCR amplification of target regions can be used in combination with gel electrophoresis, restriction digest, Sanger sequencing, or NGS for TALEN and CRISPR validation.In addition, real-time PCR can be employed for validating gene expression levels in cells.

High-content screening (HCS) in CRISPR validation

High-content imaging platforms offer exceptional high content screening (HCS) with single-cell analysis capabilities and lightning-fast time-to-data. These automated microscopic fluorescence imaging and analysis platforms detect changes in protein expression, compartmentalization, and cell morphology; all with quantitative rigor. HCS provides unbiased spontaneous phenotyping with intact, fixed, or live cells in monolayers to spheroids.

Data: Analysis of autophagy in CRISPR-edited cells using HCS

Figure 9. Automatic quantitation of autophagy using HCS. A Thermo Scientific CellInsight CX7 platform was used to identify and count LC3B granules in CRISPR-edited HAP1 cells. Cells were labeled with HCS NuclearMask Blue, HCS CellMask Deep Red, and an anti-LC3B antibody followed by Alexa Fluor 647 goat anti-rabbit antibody. Automated analysis using Thermo Scientific HCS Studio 3.0 identified nuclei (blue overlay) cell perimeter (green outline) and quantified LC3B granules (red overlay in fluorescence image and in bar chart).

With modulation of any cellular signaling pathway comes the risk of proximal and distal consequences. It is important to track targeted proteins and monitor the impact on other aspects of cell health and behavior. High-content screening (HCS) is particularly suited to this type of multiparameter investigation, and Invitrogen reagents provide the breadth of tools for interrogating cell health and behavior.

Data: HCS analysis of apoptosis, oxidative stress, protein degradation, and protein synthesis in CRISPR-edited cells

Figure 10. Rapid analysis of various cell health parameters using the Thermo Scientific CellInsight CX5 platform. Wild-type and CRISPR-edited Hap-1 cells were analyzed using the CellInsight CX5 HCS Platform for (A) apoptosis using CellEvent Caspase-3/7 Green Detection Reagent, (B) oxidative stress using Invitrogen CellROX reagents, (C) protein degradation using Invitrogen LysoTracker reagents, and (D) protein synthesis using an Invitrogen Click-iT OPP assay kit.